Debug Fcc - Cisco MDS 9000 series Command Reference Manual

debug fcc

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcc
To enable debugging for the Fibre Channel Congestion (FCC) function, use the debug fcc command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description all
errors
events
mts
trace
module slot
pkt
pkthdr
numpkt
both
tx
rx
node
opcode
sap
range
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Cisco MDS 9000 Family Command Reference
6-36
debug fcc {all | error [module slot] | event [module slot] |
mts [pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | tx | rx
[numpkt range]}] | trace [module slot]}
no debug fcc {all | error [module slot] | event [module slot] |
mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | tx | rx
[numpkt range]}} | trace [module slot]}
Modification
This command was introduced.
Enables debugging for all FCC features.
Enables debugging for FCC error conditions.
Enables debugging for FCC events.
Enables debugging for FCC tx/rx MTS packets.
Enables debugging for FCC traces.
Specifies the slot number of the module being debugged.
Enables debugging for FCC tx/rx FCC packets.
Enables debugging for FCC tx/rx FCC headers.
Specifies the number of required packets
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction,
Specifies debugging in the receive direction.
Specifies the node for the packets in the receive direction.
Specifies the opcode for the packets in the receive direction.
Specifies the sap for the packets in the receive direction.
Specifies the integer range from 1 to 4096.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x