NEC UNIVERGE SV8100 Features & Specifications Manual page 1147

UNIVERGE SV8100
To erase a previously recorded VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 716.
3. Dial 3 ( rase).
E
4. Dial the number of the VRS message you want to erase (001~100).
5. Press Hold (multiline terminal only) to cancel the procedure without erasing (and return to step 3).
- OR -
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
You hear dial tone.
.
2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.
.
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = ecord
R
5 = isten
L
3 = rase
E
5. Dial the message number (001~100), record the message and press
If you dialed 7 to record, you can dial # to listen to the message you just recorded.
.
If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if you want to Record, listen
.
to or erase another message, go back to step 4.
Voice Response System (VRS)
Issue 5.0
to end recording.
#
1 - 1137