NEC UNIVERGE SV8100 Features & Specifications Manual page 1158

Issue 5.0
Operation
Changing VRS Messages using User Admin Mode (UA)
Audio files up to 1MB may be uploaded to the SV8100 for VRS messages. All 100 VRS messages can
be uploaded or deleted. The messages can be used on all VRS features: General Message, Automated
Attendant greetings, ACD messages and the 900 Preamble.
In order for uploaded messages to play they must be in the proper format. Audio files not recorded in the
proper format may not playback. The proper format is:
Bit Rate
Sampling Size
Channel
Sampling Rate
Audio Format
1. To login, open an Internet browser and enter the IP of the SV8100 LAN port in the address line. At
default, the IP address is 192.168.0.10.
2. At the login screen enter username = USER1 and password = 1111.
3. You will then see the main menu, click on the VRS Audio Up/Download icon.
4. There can be up to 100 VRS messages and you may need to scroll through several pages or jump
to get to the desired message number.
The message numbers correspond to the same message number when accessed via the telephone. Message 1 is
.
001, message 2 is 002 and message 3 is 003, etc.
5. To delete a message, click on the red X to the right of the appropriate message.
6. To Upload a message:
Under Message No, enter the message number to be replaced.
Browse to find the location where the greeting file is stored.
Click on the upload icon to the right of the selected file name.
Depending on file size and LAN speed, it may take a minute to upload the greeting.
The uploaded message will appear in the assigned location.
1 - 1148
64kbps
8 bits
1 (Mono)
8 KHz
CCiTT a-law
Voice Response System (VRS) Upload Download Audio
UNIVERGE SV8100