Steps - Siemens SINUMERIK 840D sl Operating Manual

Dialog view during package execution (for commissioning engineers / operators)
The "Finish" dialog page cannot be deactivated. A file in text format or restricted HTML format
is displayed on this page for postprocessing.
The operator can be prompted to save the logbook when closing the logbook.
A logbook that can be opened only after a password has been entered is stored as an "*.exe"
file.
Further information can be found on package execution in the Package execution (Page 405)
section.
Figure 4-48
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.3

Steps

On the "Steps" tab, you can create a hierarchically structured step tree.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Finish dialog - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
225