Time-Of-Day Synchronization For Pc Stations; How To Set Time Synchronization On An Engineering Station; How To Set Time Synchronization On A Batch/Operator Station - Siemens SIMATIC PCS 7 Function Manual

Checking time-of-day synchronization
You can check the time-of-day synchronization:
1. Go to the Start menu in Windows and select the "Run" dialog box.
2. Enter the following in the input field:
3. Enter the following:
4. Output is interrupted by pressing CTRL+C.
5.6.2

Time-of-day synchronization for PC stations

5.6.2.1

How to set time synchronization on an engineering station

Principle
Information on time synchronization of an engineering station is available in the following
sections:
● Section "How to synchronize PC stations using NTP mode (Page 86)"
● Section "How to make DCF 77 Client Service settings on a PC station without OS
5.6.2.2

How to set time synchronization on a BATCH/operator station.

Procedure
You can find information about the time-of-day synchronization of SIMATIC BATCH stations
without Operator Station in the following sections:
● Section "How to make DCF 77 Client Service settings on a PC station without OS
● Section "How to synchronize PC stations using NTP mode (Page 86)"
Time synchronization (V8.0)
Function Manual, 03/2012, A5E02779849-02
cmd.
The Windows command line window will open.
w32tm /stripchart /computer:<Computer name of the time-of-day>
The difference in the time-of-day is shown in the prompt in tabular format.
(Page 84)"
(Page 84)"
5.6 Configuring time synchronization for a PC station without OS
Configuring time synchronization
87