Saving And Compiling Data In Netpro; How To Save And Compile The Configurations In Netpro - Siemens SIMATIC PCS 7 Getting Started

3.4

Saving and compiling data in Netpro

3.4.1

How to Save and Compile the Configurations in NetPro

Introduction
The settings you configured in HW Config for the OS Ethernet interface are accepted by
NetPro. Now save, compile, and check the network configuration.
Requirement
● Configuration has been completed in HW Config.
Procedure
Step
1
2
3
4
5
Getting Started (V8.1 with APL)
Getting Started, 07/2014, A5E32713210-AA
Action
In the Component view, select the "fast_Prj" project in the left window of SIMATIC Manager.
In the right window of SIMATIC Manager, double-click the "Plant bus" object.
The "NetPro" dialog box opens.
Select the Network > Save and Compile menu command in NetPro.
The "Save and Compile" dialog box opens.
Activate the "Compile and check everything" radio button and
click "OK".
Close the "Outputs for consistency check" dialog box.
Configuring the hardware and networks
3.4 Saving and compiling data in Netpro
23