Activate The Operator Stations; Overview Of Activating The Operator Stations; How To Check The Settings On The Os Servers; Sequence For Activating Process Mode (Runtime) - Siemens SIMATIC PCS 7 Service Manual

Process
Hide thumbs Also See for SIMATIC PCS 7:
Table of Contents

Advertisement

Activate the operator stations

9.1

Overview of activating the operator stations

Introduction

Sequence for activating process mode (Runtime):

● Process Historian (if available in the project)
● Master server (OS server)
● Standby server (redundant OS server)
● OS clients
Overview of the procedure
Step
26
27
9.2

How to Check the Settings on the OS Servers

Introduction
Before activating the projects downloaded to the various OS servers, you need to check some
of the settings in each OS.
Requirements
● The PCS 7 OS is open in WinCC Explorer.
● The following applies if a Process Historian is in the project:
– The Process Historian has the "Active" status.
– The "PH-Ready Configuration" is performed on each OS server.
Procedure
1. Open the "Redundancy" editor in WinCC Explorer.
2. Check all settings.
3. Click "OK".
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA
Action
Checking the settings of the OS Servers (Page 75)
Checking the settings on the OS Clients (Page 76)
ES
OS serv‐
OS cli‐
er
ent
X
X
9
AS
75

Advertisement

Table of Contents
loading

Table of Contents