Alcatel-Lucent 7750 SR OS Service Manual page 401

ALA-1
VPLS 9000
for
Customer 6001
MTU A
Use the following CLI syntax to create a mesh or spoke SDP bindings with a distributed VPLS
service. SDPs must be configured prior to binding. Refer to
information about creating SDPs.
Use the following CLI syntax to configure mesh SDP bindings:
CLI Syntax: config>service# vpls service-id
Mesh SDP
7750 SR OS Services Guide
Spoke-SDP 21
Spoke-SDP 22
Customer 6001
Figure 1: SDPs — Uni-Directional Tunnels
mesh-sdp sdp-id[:vc-id] [vc-type {ether|vlan}]
egress
filter {ip ip-filter-id|mac mac-filter-id}
mfib-allowed-mda-destinations
mda mda-id
vc-label egress-vc-label
ingress
filter {ip ip-filter-id|mac mac-filter-id}
vc-label ingress-vc-label
no shutdown
static-mac ieee-address
vlan-vc-tag 0..4094
MESH-SDP 3
MESH-SDP 4
Spoke-SDP 11
Spoke-SDP 10
VPLS 9000
for
ALA-3
Spoke-SDP 50
Spoke-SDP 51
MTU B
Virtual Private LAN Services
ALA-2
VPLS 9000
for
Customer 6001
MTU C
OSSG032
Configuring an SDP on page 68
Page 401
for