Alcatel-Lucent 7750 SR OS Service Manual page 387

Distributed VPLS SAPs
To configure a distributed VPLS service, you must configure service entities on originating and
far-end nodes. You must use the same service ID on all ends (for example, create a VPLS service
ID 9000 on ALA-1, ALA-2, and ALA-3). A distributed VPLS consists of a SAP on each
participating node and an SDP bound to each participating node.
For SDP configuration information, see
information, see
This example configures a distributed service between ALA-1, ALA-2, and ALA-3.
Example
The following example displays a sample configuration of the VPLS SAPs in preparation of a
VPLS service between ALA-1, ALA-2, and ALA-3.
*A:ALA-1>config>service# info
--------------------------------------------
...
7750 SR OS Services Guide
Configuring SDP Bindings on page
:
*A:ALA-1>config>service# vpls 9000 customer 6 create
*A:ALA-1>config>service>vpls# sap 1/2/5:0 create
*A:ALA-1>config>service>vpls>sap$ no shutdown
*A:ALA-1>config>service>vpls>sap# multi-service-site west
*A:ALA-1>config>service>vpls>sap# exit
*A:ALA-1>config>service>vpls#
*A:ALA-2>config>service# vpls 9000 customer 6 create
*A:ALA-2>config>service>vpls# sap 1/1/2:22 create
*A:ALA-2>config>service>vpls>sap$ no shutdown
*A:ALA-2>config>service>vpls>sap# multi-service-site west
*A:ALA-2>config>service>vpls>sap# exit
*A:ALA-2>config>service>vpls#
*A:ALA-3>config>service# vpls 9000 customer 6 create
*A:ALA-3>config>service>vpls# sap 1/1/3:33 create
*A:ALA-3>config>service>vpls>sap$ no shutdown
*A:ALA-3>config>service>vpls>sap# multi-service-site west
*A:ALA-3>config>service>vpls>sap# exit
*A:ALA-3>config>service>vpls#
vpls 9000 customer 6 vpn 750 create
description "Distributed VPLS services."
def-mesh-vc-id 750
stp
shutdown
exit
sap 1/2/5:0 create
description "VPLS SAP"
multi-service-site "West"
exit
exit
Virtual Private LAN Services
Configuring an SDP on page
400.
68. For SDP binding
Page 387