Service Management Tasks
Disabling a Management VPLS
You can shut down a management VPLS without deleting the service parameters.
When a management VPLS is disabled, all associated user VPLS services are also disabled (to
prevent loops). If this is not desired, first un-manage the user's VPLS service by removing them
from the managed-vlan-list or moving the spoke SDPs on to another tunnel SDP.
CLI Syntax: config>service
Example
Page 438
vpls service-id
shutdown
:
config>service# vpls 1
config>service>vpls# shutdown
config>service>vpls# exit
7750 SR OS Services Guide