Alcatel-Lucent 7750 SR OS Service Manual page 367

Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command
oam
hold-multiplier
keepalive
neighbor
local-address
priority-marking
no shutdown
Configure SAP ATM parameters
config>service>vpls>sap>atm#
egress
ingress
traffic-desc
encapsulation
oam
alarm-cells
Configure SAP egress parameters
config>service>vpls>sap#
egress
filter
qos
queue-override
queue
adaptation-rule
cbs
high-prio-only
mbs
rate
7750 SR OS Services Guide
Specifies whether or not the GSMP ANCP OAM capability should be
negotiated at startup of the GSMP connection.
Configures the hold-multiplier for the GSMP connections in this group.
Configures keepalive values for the GSMP connections in this group.
Configures a GSMP ANCP neighbor.
Configures the source ip-address used in the connection towards the
neighbor.
Configures the type of priority marking to be used.
Administratively disables a GSMP entity.
Enables the context to configure egress ATM attributes for the SAP.
Enables the context to configure ingress ATM attributes for the SAP.
Assigns an ATM traffic descriptor profile to a given context.
Configures RFC2684 encapsulation for an ATM PVCC delimited SAP.
Enables the context to configure OAM functionality for a PVCC
delimiting a SAP.
Configures AIS/RDI fault management on a PVCC.
Configures egress SAP QoS policies and filter policies.
Associates an IP filter policy or MAC filter policy with an egress SAP.
Associates a Quality of Service (QoS) policy with an egress SAP.
Enables the context to configure override values for the specified SAP
egress QoS queue.
Specifies the ID of the queue whose parameters are to be overridden.
Overrides specific attributes of the specified queue's adaptation rule
parameters.
Overrides specific attributes of the specified queue's CBS parameters.
Overrides specific attributes of the specified queue's high-prio-only
parameters.
Overrides specific attributes of the specified queue's MBS parameters.
Overrides specific attributes of the specified queue's Peak Information
Rate (PIR) and the Committed Information Rate (CIR) parameters.
Virtual Private LAN Services
Description Page
475
475
475
475
476
476
457
501
502
502
501
502
503
504
505
507
508
508
509
511
512
512
514
Page 367