Alcatel-Lucent 7750 SR OS Service Manual page 366

Service router - mobile gateway
Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Configuring a VPLS Service with CLI
Table 1: CLI Commands to Configure VPLS Service Parameters (Continued)
Command
collect-stats
description
disable-aging
disable-learning
discard-unknown-
source
host
host-connectivity-
verify
l2pt-termination
limit-mac-move
mac-pinning
managed-vlan-list
max-nbr-mac-addr
multi-service-site
restrict-protected-
src
restrict-unprotected-
dst
static-mac
Configure GSMP parameters
config>service>vpls>gsmp
group
ancp
dynamic-topology-
discover
line-configuration
Page 366
Enables the collection of accounting and statistical data for the SAP or
network port.
A text string describing the SAP.
Disables aging of MAC addresses for this SAP.
Disables learning of new MAC addresses for this SAP.
Enables the discard of packets with unknown source MAC addresses
when the FDB limit is reached.
Creates a static subscriber host for the SAP. Applications within the
system that make use of static host entries include anti-spoof, ARP
reply agent and source MAC population into the VPLS forwarding
database.
Enables subscriber host connectivity verification on a given SAP within
a VPLS service.
Enables L2PT termination on a given SAP or spoke SDP. L2TP
termination will be supported only for STP BPDUs. PDUs of other
protocols will be discarded.
Indicates whether or not the agent will limit the MAC re-learn (move)
rate on this SAP.
Disables relearning MAC addresses on other SAPs.
Enables the context to provision a VLAN list for the managed VPLS
SAP.
Configure the maximum number of MAC entries in the FDB.
Specifies the multi-service-site to which this SAP belongs.
Indicates how the agent will handle relearn requests for protected MAC
addresses.
Indicates how the system will forward packets destined to an
unprotected MAC address.
Creates a local static MAC entry in the Virtual Private LAN Service
(VPLS) forwarding database (FDB) associated with the Service Access
Point (SAP).
Specifies a GSMP name. A GSMP group name is unique only within
the scope of the service in which it is defined.
Configures ANCP parameters for this GSMP group.
Enables the ANCP dynamic topology discovery capability.
Enables the ANCP line-configuration capability.
Description
7750 SR OS Services Guide
Page
522
461
461
496
546
547
460
497
497
499
498
498
472
472
499
474
474
474
474

Advertisement

Table of Contents
loading

Table of Contents