List Of Commands - Alcatel-Lucent 7750 SR OS Service Manual

Configuring a VPLS Service with CLI

List of Commands

Table 13
each command is implemented with a short command description. VPLS services are configured
in the
oriented manner:
•
•
•
•
•
•
•
Table 1: CLI Commands to Configure VPLS Service Parameters
Command
Configure a VPLS service
config>service# vpls service-id [customer customer-id] [vpn vpn-id]
customer
vpn
Page 362
lists all the service configuration commands indicating the configuration level at which
config>service>vpls
Configure a VPLS service
→
Configure VPLS STP parameters
→
Configure VPLS multicast FIB parameters
→
Configure VPLS IGMP parameters
→
Configure Split Horizon Group parameters
Configure VPLS multicast FIB parameters
→
Configure VPLS IGMP parameters
Configure a VPLS SAP
→
Configure SAP ATM parameters
→
Configure SAP egress parameters
→
Configure SAP ingress parameters
→
Configure SAP STP parameters
→
Configure SAP subscriber management parameters
Configure mesh SDP parameters
Configure spoke SDP parameters
→
Configure spoke SDP STP parameters
Configure an egress multicast group
→
Applying an egress multicast group to a VPLS SAP
Configure a PE discovery policy
→
Applying a PE discovery policy to VPLS
Specifies the existing customer ID number to be associated with the
service.
Specifies the VPN ID number which allows you to identify virtual
private networks (VPNs) by a VPN identification number.
context. The command list is organized in the following task-
Description
7750 SR OS Services Guide
Page
459
459
459