Operating Instructions
4.5. SETUP CFG: VIEWING THE ANALYZER'S
CONFIGURATION INFORMATION
Press NEXT and PREV to scroll through the
following list of Configuration information:
MODEL NAME
PART NUMBER
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
1
iCHIP SOFTWARE REVISION
HESSEN PROTOCOL REVISION
ACTIVE SPECIAL SOFTWARE
1
OPTIONS
CPU TYPE
DATE FACTORY CONFIGURATION
SAVED
1
Only appears if relevant option of Feature is active.
4.6. SETUP ACAL: AUTOMATIC CALIBRATION
74
Pressing the CFG button displays the instrument configuration information. This
display lists the analyzer model, serial number, firmware revision, software
library revision, CPU type and other information.
identify the software and hardware when contacting Technical Support. Special
instrument or software features or installed options may also be listed here.
SAMPLE*
< TST TST > CAL
SAMPLE
CFG
DAS RNGE PASS CLK MORE
1
SAMPLE
NEXT
Instruments with one of the internal valve options installed can be set to
automatically run calibration procedures and calibration checks. These automatic
procedures are programmed using the submenus and functions found under the
ACAL menu.
A menu tree showing the ACAL menu's entire structure can be found in
Appendix A-1 of this manual.
Instructions for using the ACAL feature are located in Section 5.6 of this manual.
Teledyne API Model T360/T360M Operation Manual
RANGE = 500.000 PPB
PRIMARY SETUP MENU
T360 CO2 ANALYZER
PREV
Use this information to
CO2 =X.XXX
SETUP
Press EXIT at any
time to return to the
EXIT
SAMPLE display
Press EXIT at
any time to
return to SETUP
EXIT
menu
07272B DCN6552