Configuration Information (Cfg) - Teledyne 300E Instruction Manual

Operating Instructions
Example: If all passwords are enabled, the following keypad sequence would be
required to enter the SETUP menu:
PROMPTS
PASSWORD
Number
Press individual
keys to set
Numbers

6.3.4. Configuration Information (CFG)

CFG key allows the user to review certain software configuration information. This
feature is useful for showing any special features that are present in the currently
installed Disk-on-Chip. It can be displayed by entering the key sequence:
58
SAMPLE
< TST TST > CAL
SAMPLE
0 0 0
SAMPLE
8 1 8
SETUP C.3
CFG DAS RNGE PASS CLK MORE
SAMPLE RANGE = 50.0 MGM
< TST TST > CAL
SAMPLE RANGE = 50.0 MGM
CFG DAS RNGE PASS CLK MORE
SAMPLE M300E CO ANALYZER
NEXT PREV
Press NEXT of PREV to move back and
forth through the following list of
Configuration information:
SOFTWARE REVISION
LIBRARY REVISION
Model 300E Carbon Monoxide Analyzer
RANGE = 50.0 PPM CO =XX.XX
ENTER SETUP PASS: 0
ENTR
ENTER SETUP PASS: 0
ENTR
CO =XX.XX
SETUP
CO =XX.XX
EXIT
CO =XX.XX
EXIT
SERIAL NUMBER
CPU TYPE
Instruction Manual
SETUP
EXIT
Example: this
Password Enables the
Setup mode
EXIT
EXIT
Press Exit at Any
Time to Return
to Main SAMPLE
Display
Press Exit at
Any Time to
Return to
SETUP Menu
P/N 04288 REV: A