Configuration Information (Cfg); Clock (Clk) - Teledyne 200E Instruction Manual

Model 200E Instruction Manual

6.4.2. Configuration Information (CFG)

Pressing the CFG key displays the instrument configuration information. This display lists
the analyzer model, serial number, firmware revision, software library revision, operating
system and other information. Use this information to identify the software and hardware
when contacting customer service. Special instrument or software features or installed
options may also be listed here.

6.4.3. Clock (CLK)

The M200E has a built-in clock for the AutoCal timer, Time TEST function, and time stamps
on COM port messages and iDAS data entries. To set the time-of-day, press:
Enter Current
Time-of-Day
SETUP X.X TIME: 12:00
1 2 : 0 0
SETUP X.X3 TIME:
1 2 : 0 0
044100102 Rev A
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
PRIMARY SETUP MENU
SAMPLE
CFG DAS RNGE PASS CLK MORE
SAMPLE M200E NOX ANALYZER
NEXT PREV
Press NEXT of PREV to move through the
list of configuration information.
ENTR EXIT
12:00
ENTR EXIT
SETUP X.X
TIME DATE
SETUP X.X
CFG DAS RNGE PASS CLK MORE
NOX=X.X
SETUP
EXIT
EXIT
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
PRIMARY SETUP MENU
SETUP X.X
CFG DAS RNGE PASS CLK MORE
SETUP X.X TIME-OF-DAY CLOCK
TIME DATE
SETUP X.X
0 1 JAN
SETUP X.X
0 1 JAN
TIME-OF-DAY CLOCK
EXIT
PRIMARY SETUP MENU
EXIT
Operating Instructions
Press EXIT at
any time to
return to the
SAMPLE display
Press EXIT at
any time to
return to
SETUP menu
NOX=XXX.X
SETUP
EXIT
Enter Current
Date-of-Year
EXIT
DATE: 01-JAN-02
0 2 ENTR EXIT
DATE: 01-JAN-02
0 2 ENTR
EXIT returns
to the main
SAMPLE display
EXIT
47