SETUP MENU
5.
5.1. SETUP à CFG: CONFIGURATION INFORMATION
Press NEXT or PREV to move back and
forth through the following list of
Configuration information:
•
MODEL TYPE AND NUMBER
•
PART NUMBER
•
SERIAL NUMBER
•
SOFTWARE REVISION
•
LIBRARY REVISION
•
iCHIP SOFTWARE REVISION
•
CPU TYPE & OS REVISION
•
DATE FACTORY CONFIGURATION
SAVED
06864B DCN6314
The SETUP menu is sued to set instrument parameters for performing configuration,
calibration, reporting and diagnostics operations according to user needs.
Pressing the CFG button displays the instrument's configuration information. This
display lists the analyzer model, serial number, firmware revision, software library
revision, CPU type and other information.
•
Special instrument or software features or installed options may also be listed here.
•
Use this information to identify the software and hardware installed in your
T300/T300M Analyzer when contacting customer service.
To access the configuration table, press:
SAMPLE
<TST
SETUP
CFG
SETUP
PREV NEXT
RANGE=50.00 PPM
TST> CAL
PRIMARY SETUP MENU
DAS
RNGE
PASS CLK MORE
T300 CO Analyzer
CO= XX.XX
SETUP
EXIT
Press EXIT at
any time to
EXIT
return to the
SETUP menu.
97