Figure 5-21: Diag - Analog Output Calibration Mode - Single Analog Channel - Teledyne t100 Operation Manual

SETUP Menu
DIAG ANALOG I / O CONFIGURATION
PREV NEXT
DIAG AIO AOUTS CALIBRATED: NO
< SET> CAL
DIAG AIO CONC_OUT_2:5V, CAL
< SET SET> EDIT
DIAG AIO CONC_OUT_2 RANGE: 5V
SET> EDIT
DIAG AIO CONC_OUT_2 REC OFS: 0 mV
< SET SET> EDIT
DIAG AIO CONC_OUT_2 AUTO CAL: ON
< SET SET> EDIT
Figure 5-21:
110
To automatically calibrate a single analog channel from the DIAG Menu (refer to Figure
5-16), press:
ENTR EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
DIAG – Analog Output Calibration Mode – Single Analog Channel
Teledyne API - T100 UV Fluorescence SO
EXIT to Return
to the main
Sample Display
Press SET> to select the
Analog Output channel to
be configured. Then Press
EDIT to continue
DIAG AIO CONC_OUT_2 CALIBRATED: NO
<SET CAL
DIAG AIO AUTO CALIBRATING CONC_OUT_2
DIAG AIO CONC_OUT_2 CALIBRATED:
<SET CAL
Analyzer
2
EXIT
YES
EXIT
06807F DCN7335