Replacing The Burner Door - PerkinElmer aanalyst 200 User Manual

Maintenance

Replacing the Burner Door

Refer to the figure below when re-installing the burner door.
1. Hold the door in place next to the burner compartment as shown in the figure above.
2. Tilt the top of the door away from the upper door pin while you push the lower pin into the
hole in the door mount.
3. Drop the top pin down into the upper hole in the door mount while holding the bottom pin in
place. Swing the door while letting it drop down and lock into place on the hinges.
4. Close the door. Re-installation is complete.
9-16
Figure 9- 3 Replacing the burner door