PerkinElmer aanalyst 200 User Manual page 187

Buttons on Sample Information Dialog
Sample Number
Sample ID
Sample ID Column
Fill button
Dilution Factor
Dilution Factor
Column Fill button
Scroll Bar
Screen 7- 17 Sample Information Dialog
The range of sample numbers being displayed (10 at a time in the table)
can be changed by using the scroll bar. A maximum of 250 samples can
be displayed.
Shows the sample ID for each sample. Clicking on an entry field will
bring up the existing keyboard dialog, where you can enter an ID for that
sample.
Click on this button to open the Sample ID Column Fill dialog to
automatically fill in the ranges of sample IDs.
This column shows the dilution factor for each sample. Clicking on an
entry field will bring up the existing numerical value, where you can enter
a dilution value for that sample. A dilution value of 0.001 – 9999 can be
entered.
Click on this button to open the Dilution Factor Column Fill dialog,
which can be used to automatically fill in ranges of dilution factors.
Use the scroll bar to scroll through the list of 250 samples.
AAnalyst 200 User's Guide
7-29