PerkinElmer aanalyst 200 User Manual page 83

Spiral Wrap
Interlock Cable
Figure 4- 10 The burner drain system and its parts
Burner Installation
The entire installation of the burner is covered in Chapter 6, Operation of this User's Guide
Manual. The basic steps are bulleted below for your reference. Directions on how to perform each
step are discussed in detail during installation.
• installing the nebulizer on the burner
• checking that the burner end cap is secure
• connecting and securing the gas hoses to the burner
• installing and securing the burner head
Drain Interlock Cable
Connector at Burner
Drain Tubing
AAnalyst 200 User's Guide
Retainer Cap
Drain interlock
Float Switch
Assembly
Drain
Loop
Waste
Vessel
4-17