PerkinElmer aanalyst 200 User Manual page 146

Operation of the Instrument
Turret uncoded Lumina lamp (mount)
1. Start up the spectrometer, but do not ignite the flame.
2. Touch the Install Lamps button on the Lamp page of the touch screen. Fill in the required
parameters for the uncoded lamps in the Install Lamps dialog.
3. Touch the On/Off check box to turn the lamps on. A total of 3 lamps may be turned on, a
combination of 1 HCL lamp and 2 EDLs lamps.
4. Touch the Element entry field box. Select the desired element from the Select Element box. Touch
OK and the instrument performs an automatic setup.
NOTE: To change the wavelength or slit, touch the corresponding entry field box and select the alternate
wavelength or slit.
6-32
2 1
3 4
Figure 6- 15 Turret version