PerkinElmer aanalyst 200 User Manual page 127

1. Orient the assembly to slide into the tracks as shown in the figure above.
2. Slide the assembly (along the tracks) into place in front of the instrument. When the assembly is
pushed all the way in, you will hear a "clicking" sound as the three fittings seat themselves and lock
into the back of the sample compartment. Pull the lever forward to lock the burner mount.
Warning: Flashback
While the flame is on, DO NOT push the lever that is located on the burner
mount assembly.
WARNING
AAnalyst 200 User's Guide
6-13