Network Dialog - PerkinElmer aanalyst 200 User Manual

Touch Screens

Network Dialog

AAnalyst 200 data can be saved to a stand-alone computer or to a network computer using a
LAN connection. Once a network connection is established, all the analyses result data will
automatically be saved.
To establish connection between a stand-alone computer and the AA200 instrument, follow the
procedure below. It is recommended that you contact your system administrator to setup
connections for network computer.
Stand-Alone Computer
1. Use a crossover cable (P/N 0941-0061) to connect the AA200 instrument to a computer.
•
Connect the crossover cable to the Ethernet port of the E-Box (see chapter 5 for
connectors on the E-Box).
•
From the E-Box, run the crossover cable to the Ethernet port of the computer.
2. From the AA application (Touch Screen) touch the Tools... button to access the Tools dialog.
3. Touch the Network... button on the Tools dialog to access the Network dialog.
4. At the top of the Network dialog, click on the Store Data on Network Drive check box to
turn the store data function on.
7-32
Screen 7- 19 Network Dialog