PerkinElmer aanalyst 200 User Manual page 128

Operation of the Instrument
Installing the Burner Drain System
Locate and unpack the drain system from the shipping carton. It includes all the parts marked in the figure
below.
Connecting the Burner Drain System
1. Refer to the next figure when installing the drain system. Position the vessel on the floor underneath
the front of the instrument and attach the retainer cap assembly (cap, trap and loop) to the drain
vessel.
2. Hold up the free end of the drain tubing and pour approximately 250 mL of water into it until you
hear the water start to drip into the
6-14
vessel.