Precautions
Be sure that all instrument operators read and understand the
precautions listed below. It is advisable to post a copy of the
precautions near or on the instrument.
WARNING
The following precautions must be observed when using the AAnalyst 200:
•
Be sure that the voltage of the AAnalyst 200 corresponds to the power line voltage used in
your laboratory.
•
Never remove the side panels of the AAnalyst 200 without shutting down the instrument
and disconnecting the instrument power cord from line power.
•
Only high quality purge gases should be used with the AAnalyst 200. Minimum purity of
99.9% is recommended. A high quality filter-dryer accessory is recommended for the
removal of any moisture from the purge gases.
AAnalyst 200 User's Guide
2-5