AAnalyst 200 User's Guide
Setting Up the AutoSampler
The AA200 Analyst supports autosampler model AS-90, AS-90 plus (p/n B314-0291), and AS-93 plus
(p/n B314-0330). Depending on your autosampler model, refer to the User's Guide provided with your
autosampler for complete installation.
Electrical connections
Connecting autosampler (AS-90 plus or AS-93 plus) to the E-Box:
1. Connect RS 232 cable to the Autosampler connector on the E-Box.
2. From the E-Box, run the RS 232 cable to the com port 2 of the autosampler.
3. Plug the autosampler power cord to the power outlet and power up the autosampler.
Your autosampler electrical connections are now complete. For complete procedure on how to select
autosampler type, see Chapter 7, Touch Screens.
Autosampler
E-box
RS 232 Cable
Com Port 2
Autosampler
Figure 5- 13 Autosampler Connection
5-25