PerkinElmer aanalyst 200 User Manual page 191

Network Setup
5. In the Network Setup section of the Network dialog, choose Specify an IP address option.
Enter the suggested IP Address and Subnet Mask below.
•
IP Address – 10.0.0.1
•
Subnet Mask – 255.255.255.0
NOTE: Entries for Default Gateway are not needed for a stand-alone computer.
Storage Location
In the Storage Location section of the Network dialog, fill in the entries for Computer Name,
Share Name, User Name, and Password.
6. Computer Name – Enter the name given to identify the stand-alone computer.
To locate the computer name, do the following procedure on the stand-alone PC.
•
Point to the My Computer icon, and right click the mouse once.
•
A shortcut menu appears and selects Properties.
•
System Properties dialog appear and select the Network Identification tab.
Screen 7- 20 Shortcut Menu
AAnalyst 200 User's Guide
7-33