Aligning Lamp - PerkinElmer aanalyst 200 User Manual

Aligning Lamp

After you have installed the lamp you require for your planned analyses, you must align it in the optical
path so that maximum radiant energy passes to the detector. In a single lamp configuration, you must
manually align the lamp position by using the adjustable knobs as shown in the figure below.
Warning: UV Radiation – Risk of Eye Damage
The lamps may emit UV radiation which can damage your eyes.
Do not gaze into a lighted lamp.
Α
lways wear UV-absorbing safety glasses when looking at the radiation from the
lamps.
Figure 6- 14 Lamp alignment controls
AAnalyst 200 User's Guide
6-29