PerkinElmer aanalyst 200 User Manual page 81

The Burner Head
All the burner heads are made from titanium. The 10-cm, air-acetylene burner head is standard
with the AAnalyst instruments. All the available burner heads are listed next in numerical order.
• N040-0100: 5-cm, single-slot burner head (for nitrous oxide-acetylene operation).
• N040-0101: 5-cm, single-slot burner head (for air-acetylene operation). It features a wider slot
than the nitrous oxide burner head.
• N040-0102: 10-cm, single-slot burner head (for air-acetylene operation - standard with all
burners).
• N040-0103: 10-cm, three-slot burner head (for analysis of high dissolved solids content
solutions with air-acetylene flames).
The 5-cm single-slot air-acetylene burner head is rotatable to 90 degrees.
N040-0100, 5-cm (2-in.)
Nitrous Oxide Operation
N040-0102, 10-cm (4-in.)
Air-Acetylene Operation
Positioning
Notches
Magnetic
Identification
Strip
Figure 4- 9 The four available burner heads.
AAnalyst 200 User's Guide
N040-0101, 5-cm (2-in.)
Air-Acetylene Operation
90°
60°
45°
0°
N040-0103, 10-cm (4-in.)
3-Slot Air-Acetylene Operation
4-15