Installing The Touch Screen - PerkinElmer aanalyst 200 User Manual

Installation

Installing the Touch Screen

The touch screen is packed separately for shipping. To facilitate installation of the touch screen you must
temporarily remove the lamp door.
Remove the lamp door and install the touch screen
Remove the lamp door
1. Loosen the lower securing screw with a screwdriver and place in a secure place. Gently push out the
upper part of the door from the upper pin and maneuver the lower part of the door out from the
instrument. Keep the screw for when you remount the lamp door.
2. Lift out the lamp door and put it in a secure location.
5-10
Figure 5- 3 Removing lamp door