PerkinElmer aanalyst 200 User Manual page 254

Maintenance
Warning: Unauthorized Adjustments and Servicing
Only a PerkinElmer service engineer or similarly trained and authorized
person should be permitted to service the instrument.
WARNING
If the spectrometer system does not function correctly...
•
Switch off the spectrometer system and make sure that it cannot be operated.
•
Contact your local PerkinElmer office.
You should only perform the maintenance procedures described in this guide.
For any other maintenance or service contact your local PerkinElmer office to arrange for a
service engineer to visit. In particular you should only allow a PerkinElmer service engineer or
similarly trained and authorized person to perform any work on:
Electrical components inside the instrument (excluding the E-Box);
1.
The gas connections and gas system pneumatics;
2.
The monochromator and all other optical system components.
3.
Before the service engineer arrives
• Make sure that the instrument and work area are clean.
• Empty corrosive solutions from the burner drain vessel.
• Then add water to the drain trap to activate the function.
9-10