PerkinElmer aanalyst 200 User Manual page 271

Unscrew the two thumbscrews holding the burner chamber and plate to the burner
assembly (one thumbscrew can be seen under the burner chamber in
9. Figure 9- 7 Exploded view of the burner chamber assembly. Lift the burner chamber and
plate from the assembly.
10. Clean the chamber. Place parts in an ultrasonic cleaner and let them soak in a detergent
solution in the machine until they are completely clean.
11. Remove, rinse with deionized water and allow to dry.
AAnalyst 200 User's Guide
9-27