Switches And Connectors On The E-Box - PerkinElmer aanalyst 200 User Manual

Installation

Switches and Connectors on the E-Box

All electronics are located in a single user-replaceable module called the E-Box. Switches and connector
ports are located on the front panel of the E-Box as shown in the figure below.
Serial 1
Figure 5- 12 Switches and ports on the front panel of the E-Box.
Autosampler
Serial 1
Ethernet
Remote Trigger
EDL 1
EDL 2
Printer
Keyboard
Display
On/Off Switch
AC Input
5-24
Remote Trigger
Ethernet
Autosampler
AC Input
On/Off switch
Connection port for autosampler.
Connection for serial port.
Connection port for the network.
Connection port for foot switch or FIAS Read cable.
Connection port for EDL in lamp position 1.
Connection port for EDL in lamp position 2.
Connection port for printer.
Connection port for keyboard.
Connection port for the touch screen.
Power switch.
Connection of the power line cord.
Printer
Keyboard
EDL2 EDL1
Display