Installing The Burner Door - PerkinElmer aanalyst 200 User Manual

Installing the Burner Door

The burner door is packed separately for shipping. Refer to the figure below when installing the door.
1. Hold the door in place next to the burner compartment.
2. Tilt the top of the door away from the upper door pin while you push the lower pin up into the hole
in the door mount.
3. Drop the top pin down into the upper hole in the door mount while holding the bottom pin in place.
Swing the door while letting it drop down and lock into place on the hinges.
4. Close the door. This completes the procedure for installing the burner door.
Burner Door
Figure 5- 10 Installing the atomizer compartment door
AAnalyst 200 User's Guide
3
2
1
5-21