Table of Contents
Advertisement
Common Safety Precautions
Prior to Use
•
Before using the instrument, be sure to read this user's guide carefully to attain a full
understanding of its operations.
•
Keep this user's guide handy nearby so it can be referred to whenever needed.
•
Be sure to observe the procedures specified in this user's guide.
•
Be sure to understand and follow all the safety instructions given in this user's guide.
•
Be sure to observe all the hazard warnings attached to the instrument or provided in this
user's guide. Failure to do so could result in personal injury or damage to the instrument.
•
Be sure to follow all the methods of use instructed in this user's guide for proper
application of the product.
•
Absolutely avoid modifying the product, using non-specified parts, or removing safety
devices as it could be hazardous.
•
Do not perform any operation or action other than described in this user's guide. If you
have any trouble in the instrument, notify the nearest sales representative or service office
of PerkinElmer.
•
When using chemicals for the instrument, be sure to provide proper ventilation of the
room. Inadequate ventilation could endanger human health.
•
Keep in mind that the hazard warnings in the manuals or on the product cannot cover
every possible case, as it is impossible to predict and evaluate all circumstances
beforehand. Always be alert and use your common sense.
In Use
If an abnormality such as unusual noise, odor, fuming or gas leakage occurs during
operation of the instrument, immediately disconnect power to the instrument, and take
proper safety measures as required. Then, contact your PerkinElmer service representative.
Installation, Maintenance, and Relocation
•
At the time of delivery, installation of the instrument shall be carried out by or under
supervision of qualified service personnel of the manufacturer or its authorized service
agent for ensuring safety and high accuracy in operation of the instrument. It is not
permitted for the user to carry out installation.
•
After completion of installation, check that all the standard parts are provided. If the
instrument is made active with any one of the standard parts not equipped, a failure could
occur which may result in a hazardous condition.
If any item is missing or damaged or if you have any questions, please notify PerkinElmer.
NOTE:
Safety Practices .
19
Advertisement
Table of Contents
Troubleshooting
