Caller Id (Cid) - NEC AT-50 User Manual

Caller ID (CID)

This telephone will display Caller ID (CID) information received with incoming calls. The last 30
Caller ID numbers received are automatically stored in CID memory (up to 21 digits each). The
numbers stored in CID memory may be reviewed, deleted, or dialed back if desired.
When a new call is received with CID and goes unanswered, the NEW icon will flash. The number
of new (unanswered) calls received with CID is indicated on the bottom row of the display. The
NEW icon and number of unanswered calls will disappear after confirming CID by SEARCH key.
Note that the oldest call in the list occupies position 01 and new calls are stored at the end of the
list.
When CID is restricted by the caller, "NO CID" is displayed. For international and payphone calls,
"OUT OF AREA" is displayed.
To Preview the CID Memory:
1. Press the SEARCH key until the "IN" icon is shown on the display.
Advance up or down to review received CID numbers by pressing the △ or ▽keys. To
2.
view the most recent NEW CALL, press the ▽ key.
3. Press the DELETE key to remove the displayed number from the list.
To Dial Back from the CID Memory:
1. Press the SEARCH key until the "IN" icon is shown on the display.
Advance up or down to the phone number you wish to dial by pressing the △ or ▽
2.
keys.
3. When the required phone number is displayed, press the PBX DIAL key, or lift the handset.
The number is automatically dialed.
10
FEATURES