Feature Operation; To Originate A Call Using Selective Dialing (Dynamic Dial Pad, Preset Dial); To Originate A Call Using Speed Calling (One-Touch Speed Calling Keys) - NEC UNIVERGE DT920 Series User Manual

FEATURE OPERATION

TO ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC
DIAL PAD, PRESET DIAL)
Dynamic Dial Pad
1.
Enter desired telephone number (Digit keys
.
*, and #)
2.
An LED on the Speaker key lights. Hear the key
touch tone.
3.
The dialed number appears on the top of LCD.
Pressing the Speaker key or going off-hook is not necessary
Preset Dial
1.
Enter desired telephone number (Digit keys
.
*, and #)
2.
The dialed number appears on the top of LCD.
3.
Lift the handset or press the Speaker key.
3.
Press the originating Line key and lift the handset.
Originating call operation is canceled by the following soft
key operation;
- Press the Exit key or Cnl key.
- Press the Clr key to cancel by one digit.
- OR -
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
1.
Press the desired One-Touch Speed Calling key,
or press the Speaker key and One-Touch Speed
Calling key.
To Program
(Available only on the terminal with the One-Touch Speed
Calling key.)
0-9,
1.
Press the Feature key.
2.
Press the desired One-Touch Speed Calling
3.
Enter the desired telephone number or feature
access code on the keypad. Display indicates the
digits dialed
4.
Press the Feature key again to save the number.
To Verify
1.
0-9,
Press the Feature key.
2.
Press the desired One-Touch Speed Calling
3.
Display indicates digits programmed
■To program a hook switch for transfer or feature
activation, press the Recall key as first digit. (! displays
on LCD.)
■To program a pause, press the Recall key as any digit
other than the first digit. (– displays on LCD.)
■To program a Voice Call, press Transfer key after
dialing station number. (VOICE displays on LCD.)
■The One-Touch Speed Calling key for a feature
access:
The One-Touch Speed Calling key may be used as a
feature key by storing the feature access code. The
features may be programmed on a system basis by the
Telephony Server administrator. Access codes may be
stored in conjunction with telephone numbers. For
example, you can program one button to transfer to a
certain extension.
55
FEATURE OPERATION
.
key.
key.