Transfer Call - Start; Transfer Call - Blind; Transfer Call - Cancel; Hang Up - NEC UNIVERGE SV8100 Applications

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

SV8100

___________________________________________________________________________________

1.4

___________________________________________________________________________________

Desktop Applications

The Destination drop down list includes a list of the most recent transfer

destinations entered in this dialog box.

The actions associated with each of the dialog buttons are described in the

following sections.

1.3.1

Transfer Call – Start

When the Start button is selected, the software will initiate a

supervised transfer of the call. The Transfer dialog will be updated

(refer to

Figure 4-2 Transfer Call –

Selecting the Complete button will connect the original caller to the

destination and disconnect the user.

Selecting the Disconnect button will hang-up from the call to the

Destination, and reconnect to the original caller.

1.3.2

Transfer Call – Blind

When the Blind button is selected, the application will initiate an

unsupervised transfer to the specified destination.

Once the transfer is complete, the active call will be removed from the

active call area (Full Window and Toolbar modes).

1.3.3

Transfer Call – Cancel

When the Cancel button is selected, the transfer operation will be

cancelled and the Transfer dialog will be closed.

Pressing the Esc key will also initiate the Cancel operation.

The Hang Up button will disconnect the user from the active call.

When the active call is disconnected, the associated entry in the Active

Call list will be removed (Full Window and Toolbar modes).

Start).

Figure 4-2 Transfer Call – Start

Issue 1.0

4 - 3

Table of Contents