Table of Contents
Advertisement
Base Module
2.4.4.1.
Details of Partition Status Display
The status information for each partition consists of the following items:
No.
(1)
Numeral
(2)
Numeral (0-7)
(3)
Character string
POWER OFF
STOPPED
HW INITIALIZING
SW INITIALIZING
OS BOOTING
RUNNING
FAULT
SHUT DOWN
NOT CONFIGURED
(4)
6 digit hex number
(5)
Character string
(6)
Character string
855-900549
1
2
xx N sssssssssssssss cccccc
ttttttttttttttttttttttttttttttt
uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
Item
3
4
Represents the system No. Fixed to 00 for all other
models.
Denotes the partition number.
Represents partition states.
Indicates DC OFF state.
Indicates DC ON, No Failure, and Halt state.
Means that the iSP is initializing the HW. BIOS is still not
booted.
Means that the system is being initialized by BIOS.
Means that the OS is being booted (HP-UX only).
Means that control is passed to EFI after system
initialization by BIOS is complete.
Means that the system is in Halt state due to failure.
Means that the ISP is shutting down the HW.
Means "Not Configured."
Represents the latest chassis code sent from the BIOS
or OS.
Four-digit error code provided by BIOS.
It is cleared when the system is booted next time, or
with the CS command.
Warning or error message provided by the SP, shown in
the same format as Activity logs. For long messages,
their tail part will be omitted.
It is cleared when the system is booted next time, or
with the CS command.
2-26
5
6
Description
Advertisement
Table of Contents
