Mounting Location Of Circuit Cards - NEC NEAX2000 IPS System Manual

CÔNG TY VIỄN THÔNG VIỆT PRO

MOUNTING LOCATION OF CIRCUIT CARDS

This section explains the conditions for mounting circuit cards used in the system.
Regular PIM
The figure below shows circuit card mounting slots allocated in the regular PIM.
AC/DC
PWR
PIM
0-7
DC/DC
PWR
LT00-LT11 : Line/Trunk card mounting slots
AP00-AP11 : Application Processor card mounting slots
MP12 : PN-CP24-A/PN-CP24-B mounting slot
FP12 : PN-CP15 mounting slot
*1 PN-CP24-A/PN-CP24-B (MP) card is mounted in the MP12 slot of PIM0.
PZ-M606-A (ETHER) card is mounted on the PN-CP24-A/PN-CP24-B (MP) card.
PN-CP15 (FP) card is mounted in the FP12 slot of PIM2, 4, 6 according to the system configura-
tion.
*2 PN-IPTB (IPT) card is mounted in the AP00-AP11 slots of PIM0-7.
PN-4VCTI (4VCT) card is mounted in the LT00-LT11 slots of PIM0-7.
Either line/trunk cards or application processor cards can be mounted in the LT00/AP00-LT11/
AP11 slots of PIM0-7.
Chuyên phân phối tổng đài NEC
Circuit Card Mounting Slots (Regular PIM)
* *
3 4
*
5
LTC0
CHAPTER 4 CIRCUIT CARD INFORMATION
MOUNTING LOCATION OF CIRCUIT CARDS
*
2
* *
3 4
*
5
LTC1
LTC2
BWB
FRONT
VM : PZ-VM00/VM00-M/VM03-M mounting slot
PFT : PZ-8PFTB mounting slot
AC/DC PWR: PZ-PW121/PW126 mounting slot
DC/DC PWR: PZ-PW122 mounting slot
– 271 –
http://vietpro.com.vn
*
1
LTC3
NOTE 1, NOTE 2
NOTE 1, NOTE 2
Continued on next page
ND-71503(E) Rev.5.0
9pch4001.fm
JANUARY/16/2004