Procedure for Unplugging/Plugging Circuit Cards
When removing a circuit card from the PIM or when mounting a circuit card in the PIM, follow the
procedure in
Table
2-1.
Table 2-1 Procedure for Unplugging/Plugging Circuit Cards
CIRCUIT CARD
• PN-CP14 (MP)
• PZ-PW121 (AC/DC
PWR)
• PZ-PW126 (AC/DC
PWR)
• PZ-PW122 (DC/DC
PWR)
• PZ-M537 (EXPMEM)
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 3.0
PROCEDURE
PLUG
UNPLUG
(1) Power off
(1) Power off
(2) Plug in
(2) Unplug
(3) Power on
(3) Power on
CHAPTER 2 INSTALLATION
CONDITION
These circuit cards must be
plugged in or unplugged only
with power off to prevent
damage to the card or other
system circuitry.
Precautions
Page 49