Problems With System Repair - NEC Express5800/R320a-E4 User Manual

6-22 Troubleshooting

Problems with System Repair

"Press F6 if you need to install a third party SCSI or RAID driver..." was not displayed and there
was no chance to enter
2003 CD-ROM" was performed.
Did you press any key when the message "Press any key to boot from CD" is displayed on
top of the screen?
→
Start-up from Windows Server 2003 CD-ROM is required to start the Recovery Console
from Windows Server 2003 CD-ROM. Press any key while the message "Press any key
to boot from CD" is displayed on the screen. You cannot start the Recovery Console from
the CD-ROM unless the any key is pressed while the message is being displayed. Restart
the system when it does not start from CD-ROM and the message "Press F6 if you need
to install a third party SCSI or RAID driver..." is not displayed. See "Starting up
Recovery Console" in "SYSTEM REPAIR" in this chapter to start again.
The screen turns out to be black for a while when booting the Recovery Console.
→
If you start the Recovery Console that is installed in the system, the screen turns out to be
black for a while when booting the Recovery Console. Since the system is normally
working, please wait for a while.
F5 F6
and when "When starting Recovery Console from Windows Server