System Data Save/Load/Verify - NEC UNIVERGE SV8300 Pc Programming Manual

System Data Save/Load/Verify

The [System Data Save/Load/Verify] menu makes it possible to:
• Save : Saves system data registered on the SV8300 to PCPro.
• Load : Loads system data saved on PCPro into the SV8300.
• Verify : Compares system data registered on the SV8300 with system data saved on PCPro.
One of the following action will display [System Data Save/Load/Verify] screen in the work window.
• Click submenu [System Data Save/Load/Verify] in Standard Mode.
• On the Main Menu, click [System] > [System Data Save/Load/Verify] in this order.
NOTE 1: Establish a communication link with the SV8300 before proceeding with software license
authentication.
For how to establish a communication link, refer "Establishing a Link".
NOTE 2: While saving, loading or verifying system data, do not attempt to write and read system data to
and from the SV8300 by using CAT or any other application.
[System Data Save/Load/
Verify] menu
No. Button name
(1) [Save]
(2) [Load]
(3) [Verify]
(1)
(2)
(3)
Click to save system data. The [Save] screen is displayed.
Click to load system data. The [Load] screen is displayed.
Click to verify system data. The [Verify] screen is displayed.
Description
4-81
Chapter 4 Standard Mode
[Maintenance] Category
Page 2-12
NWA-033628-001 Rev.1.0