Ipv6 Ospf Display Route Single-Line - Allied Telesis AT-x510-28GTX Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
IPV OSPF DISPLAY ROUTE SINGLE

ipv6 ospf display route single-line

Overview Use this command to change the result of the show ipv6 route command to
display each route entry on a single line.
ipv6 ospf display route single-line
Syntax
no ipv6 ospf display route single-line
Mode Global Configuration
Example To display each route entry on a single line.
awplus#
awplus(config)#
Related show ipv6 ospf route
Commands
C613-50102-01 REV C
-
LINE
configure terminal
ipv6 ospf display route single-line
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1037