Local Remote Locrem - ABB REG650 Technical Manual

Section 12
Control
12.2.3
12.2.3.1
12.2.3.2
12.2.3.3
12.2.3.4
336

Local remote LOCREM

Identification
Function description
Local remote
Functionality
The signals from the local HMI or from an external local/remote switch are applied via
the function blocks LOCREM and LOCREMCTRL to the Bay control (QCBAY)
function block. A parameter in function block LOCREM is set to choose if the switch
signals are coming from the local HMI or from an external hardware switch connected
via binary inputs.
Function block
LOCREM
CTRLOFF OFF
LOCCTRL LOCAL
REMCTRL REMOTE
LHMICTRL VALID
IEC09000076_1_en.vsd
IEC09000076 V1 EN
Figure 155: LOCREM function block
Signals
Table 200: LOCREM Input signals
Name Type
CTRLOFF BOOLEAN
LOCCTRL BOOLEAN
REMCTRL BOOLEAN
LHMICTRL INTEGER
Table 201: LOCREM Output signals
Name Type
OFF BOOLEAN
LOCAL BOOLEAN
REMOTE BOOLEAN
VALID BOOLEAN
IEC 61850 IEC 60617
identification identification
LOCREM -
Default Description
0 Disable control
0 Local in control
0 Remote in control
0 LHMI control
Description
Control is disabled
Local control is activated
Remote control is activated
Outputs are valid
1MRK 502 043-UUS B
ANSI/IEEE C37.2
device number
-
Technical Manual