Settings - ABB REG650 Technical Manual

1MRK 502 043-UUS B
9.4.5
Table 157: OEXPVPH (24) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
Pickup1 100.0 - 180.0
Pickup2 100.0 - 200.0
t_MinTripDelay 0.005 - 60.000
TDForIEEECurve 1 - 60
AlarmPickup 50.0 - 120.0
tAlarm 0.00 - 9000.00
Table 158: OEXPVPH (24) Non group settings (basic)
Name Values (Range)
GlobalBaseSel 1 - 6
VoltConn Pos Seq
UL1
UL2
UL3
UL1L2
UL2L3
UL3L1
9.4.6
Technical Manual

Settings

Unit Step
- -
%VB/f 0.1
%VB/f 0.1
s 0.001
- 1
% 0.1
s 0.01
Unit Step
- 1
- -
Only PosSeq or UL1L2 should be seleced for the VoltConn setting.
Monitored data
Table 159: OEXPVPH (24) Monitored data
Name Type
TMTOTRIP REAL
VPERHZ REAL
THERMSTA REAL
Default Description
Disabled Operation Disable / Enable
110.0 Operate level of V/Hz at no load and rated
freq in % of (Vbase/frated)
140.0 High level of V/Hz above which tMin is used,
in % of (Vbase/fn)
7.000 Minimum trip delay for V/Hz curve
1 Time multiplier for IEEE inverse type curve
100.0 Alarm pickup level
5.00 Alarm time delay
Default Description
1 Selection of one of the Global Base Value
groups
Pos Seq Selection of measured voltage
Values (Range) Unit
- s
- V/Hz
- %
Section 9
Voltage protection
Description
Calculated time to trip for
overexcitation, in sec
Voltage to frequency ratio in
per-unit
Overexcitation thermal status
in % of trip pickup
273