Indications - ABB REG650 Technical Manual

Section 14
Monitoring
14.4
14.4.1
14.4.2
14.4.3
14.4.3.1
14.4.4
456

Indications

Functionality
To get fast, condensed and reliable information about disturbances in the primary and/
or in the secondary system it is important to know, for example binary signals that
have changed status during a disturbance. This information is used in the short
perspective to get information via the local HMI in a straightforward way.
There are three LEDs on the local HMI (green, yellow and red), which will display
status information about the IED and the Disturbance report function (triggered).
The Indication list function shows all selected binary input signals connected to the
Disturbance report function that have changed status during a disturbance.
Function block
The Indications function has no function block of it's own.
Signals
Input signals
The Indications function logs the same binary input signals as the Disturbance report
function.
Operation principle
The LED indications display this information:
Green LED:
Steady light In Service
Flashing light Internal fail
Dark No power supply
Yellow LED:
Function controlled by SetLEDn setting in Disturbance report function.
Red LED:
1MRK 502 043-UUS B
Technical Manual