ABB REG650 Technical Manual page 327

1MRK 502 043-UUS B
Name Values (Range)
OperationSynch Disabled
Enabled
FreqDiffMin 0.003 - 0.250
FreqDiffMax 0.050 - 0.500
FreqRateChange 0.000 - 0.500
tBreaker 0.000 - 60.000
tClosePulse 0.050 - 60.000
tMaxSynch 0.00 - 6000.00
tMinSynch 0.000 - 60.000
OperationSC Disabled
Enabled
VDiffSC 0.02 - 0.50
FreqDiffA 0.003 - 1.000
FreqDiffM 0.003 - 1.000
PhaseDiffA 5.0 - 90.0
PhaseDiffM 5.0 - 90.0
tSCA 0.000 - 60.000
tSCM 0.000 - 60.000
AutoEnerg Disabled
DLLB
DBLL
Both
ManEnerg Disabled
DLLB
DBLL
Both
ManEnergDBDL Disabled
Enabled
tAutoEnerg 0.000 - 60.000
tManEnerg 0.000 - 60.000
Technical Manual
Unit Step Default
- - Disabled
Hz 0.001 0.010
Hz 0.001 0.200
Hz/s 0.001 0.300
s 0.001 0.080
s 0.001 0.200
s 0.01 600.00
s 0.001 2.000
- - Enabled
pu 0.01 0.15
Hz 0.001 0.010
Hz 0.001 0.010
Deg 1.0 25.0
Deg 1.0 25.0
s 0.001 0.100
s 0.001 0.100
- - DLLB
- - Both
- - Disabled
s 0.001 0.100
s 0.001 0.100
Section 12
Description
Operation for synchronizing function Off/On
Minimum frequency difference limit for
synchronizing
Maximum frequency difference limit for
synchronizing
Maximum allowed frequency rate of change
Closing time of the breaker
Breaker closing pulse duration
Resets synch if no close has been made
before set time
Minimum time to accept synchronizing
conditions
Operation for synchronism-check function Off/
On
Voltage difference limit for synchrocheck in
p.u of set voltage base value
Frequency difference limit between bus and
line Auto
Frequency difference limit between bus and
line Manual
Phase angle difference limit between bus and
line Auto
Phase angle difference limit between bus and
line Manual
Time delay output for synchrocheck Auto
Time delay output for synchrocheck Manual
Automatic energizing check mode
Manual energizing check mode
Manual dead bus, dead line energizing
Time delay for automatic energizing check
Time delay for manual energizing check
Control
321