1MRK 502 043-UUS B
17.5.3
17.5.4
17.5.5
17.5.6
Technical Manual
Function block
CHNGLCK
LOCK*
ACTIVE
OVERRIDE
IEC09000062-1-en.vsd
IEC09000062 V1 EN
Figure 253:
CHNGLCK function block
Signals
Table 434:
CHNGLCK Input signals
Name
Type
LOCK
BOOLEAN
Table 435:
CHNGLCK Output signals
Name
Type
ACTIVE
BOOLEAN
OVERRIDE
BOOLEAN
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600)
Operation principle
The Change lock function (CHNGLCK) is configured using ACT.
The function, when activated, will still allow the following changes of the IED state
that does not involve reconfiguring of the IED:
•
Monitoring
•
Reading events
•
Resetting events
•
Reading disturbance data
•
Clear disturbances
•
Reset LEDs
•
Reset counters and other runtime component states
•
Control operations
Default
Description
0
Activate change lock
Description
Change lock active
Change lock override
Section 17
Basic IED functions
559